2018+ Yamaha MT07 Seat Mods
***READ ALL FOLLOWING INFORMATION CLOSELY***
***READ IT ALL***
***ALL OPTIONS AND PURCHASES MADE ARE FOR MODIFICATION TO YOUR OEM SEAT. THIS MEANS YOUR SEATS MUST BE SHIPPED TO OLD MON MFG. ALL SALES ARE ONLY FOR A MADE TO ORDER SERVICE and NOT A READY TO SHIP PRODUCT***
***DOMESTIC US CUSTOMERS ONLY***
***SEND ONLY OEM SEATS FOR MODIFICATION…DO NOT SEND AFTERMARKET IMMITATIONS***
Freestyle seat modification for the 2018-20 Yamaha MT07.
Our selection for the MT07 started a little differently than other models. The first rear seat version we made available was the +1 Inch face extension, which we designed specifically for @LowlifeStunts. Upon his request the face of the +1 inch version is also at a steep aggressive angle (view photos).
If you are comparing seats from the previous generation motorcycle, the Yamaha FZ07, to the MT07 they are not the same. The rear seat of the MT07 was changed on both profile and length. The MT07 is longer by design and reaches closer to the front drivers seat. This makes the +1inch Face Extension on the MT07 similar in length to the +2 Inch version for the FZ07.
**For a wider explanation CLICK HERE to see Seat Features**
So WHAT are you buying?
For REAR SEAT ONLY options, you WILL NEED to send in your OEM seat pan as a foundation for the seat build. We then begin the conversion process, starting from that base, when it arrives in our shop.
All REAR Freestyle seats receive 100% brand NEW one piece foam formed within a mold. This process allows exacting consistency from one seat to the next, while also providing an extremely dense and resilient foam.
The final foam product is in a whole other class of quality. It is far superior to typical custom seat methods, that involve leaving a layer of your old worn foam and topped with a few new layers then shaped by hand.
For add FRONT SEAT ONLY option, you are selecting to have your front seat wrapped with material that matches your new rear seat. This service is for the front seat COVER ONLY, and does NOT include any modification or repairs to the original foam. For this reason, it is important that the seat you send to be reupholstered be in very good condition, without damage to the foam.
WE WILL NOT REPAIR ANY FRONT SEAT FOAM WITHOUT ADDITIONAL CHARGES. It will almost always be cheaper for you to purchase a good OEM front seat to start with, rather than incur additional charges. Foam is expensive and the work to repair is time consuming. (In the future we will offer complete new front foam)
***READ ALL FOLLOWING INFORMATION CLOSELY***
***READ IT ALL***
***ALL OPTIONS AND PURCHASES MADE ARE FOR MODIFICATION TO YOUR OEM SEAT. THIS MEANS YOUR SEATS MUST BE SHIPPED TO OLD MON MFG. ALL SALES ARE ONLY FOR A MADE TO ORDER SERVICE and NOT A READY TO SHIP PRODUCT***
***DOMESTIC US CUSTOMERS ONLY***
***SEND ONLY OEM SEATS FOR MODIFICATION…DO NOT SEND AFTERMARKET IMMITATIONS***
Freestyle seat modification for the 2018-20 Yamaha MT07.
Our selection for the MT07 started a little differently than other models. The first rear seat version we made available was the +1 Inch face extension, which we designed specifically for @LowlifeStunts. Upon his request the face of the +1 inch version is also at a steep aggressive angle (view photos).
If you are comparing seats from the previous generation motorcycle, the Yamaha FZ07, to the MT07 they are not the same. The rear seat of the MT07 was changed on both profile and length. The MT07 is longer by design and reaches closer to the front drivers seat. This makes the +1inch Face Extension on the MT07 similar in length to the +2 Inch version for the FZ07.
**For a wider explanation CLICK HERE to see Seat Features**
So WHAT are you buying?
For REAR SEAT ONLY options, you WILL NEED to send in your OEM seat pan as a foundation for the seat build. We then begin the conversion process, starting from that base, when it arrives in our shop.
All REAR Freestyle seats receive 100% brand NEW one piece foam formed within a mold. This process allows exacting consistency from one seat to the next, while also providing an extremely dense and resilient foam.
The final foam product is in a whole other class of quality. It is far superior to typical custom seat methods, that involve leaving a layer of your old worn foam and topped with a few new layers then shaped by hand.
For add FRONT SEAT ONLY option, you are selecting to have your front seat wrapped with material that matches your new rear seat. This service is for the front seat COVER ONLY, and does NOT include any modification or repairs to the original foam. For this reason, it is important that the seat you send to be reupholstered be in very good condition, without damage to the foam.
WE WILL NOT REPAIR ANY FRONT SEAT FOAM WITHOUT ADDITIONAL CHARGES. It will almost always be cheaper for you to purchase a good OEM front seat to start with, rather than incur additional charges. Foam is expensive and the work to repair is time consuming. (In the future we will offer complete new front foam)
***READ ALL FOLLOWING INFORMATION CLOSELY***
***READ IT ALL***
***ALL OPTIONS AND PURCHASES MADE ARE FOR MODIFICATION TO YOUR OEM SEAT. THIS MEANS YOUR SEATS MUST BE SHIPPED TO OLD MON MFG. ALL SALES ARE ONLY FOR A MADE TO ORDER SERVICE and NOT A READY TO SHIP PRODUCT***
***DOMESTIC US CUSTOMERS ONLY***
***SEND ONLY OEM SEATS FOR MODIFICATION…DO NOT SEND AFTERMARKET IMMITATIONS***
Freestyle seat modification for the 2018-20 Yamaha MT07.
Our selection for the MT07 started a little differently than other models. The first rear seat version we made available was the +1 Inch face extension, which we designed specifically for @LowlifeStunts. Upon his request the face of the +1 inch version is also at a steep aggressive angle (view photos).
If you are comparing seats from the previous generation motorcycle, the Yamaha FZ07, to the MT07 they are not the same. The rear seat of the MT07 was changed on both profile and length. The MT07 is longer by design and reaches closer to the front drivers seat. This makes the +1inch Face Extension on the MT07 similar in length to the +2 Inch version for the FZ07.
**For a wider explanation CLICK HERE to see Seat Features**
So WHAT are you buying?
For REAR SEAT ONLY options, you WILL NEED to send in your OEM seat pan as a foundation for the seat build. We then begin the conversion process, starting from that base, when it arrives in our shop.
All REAR Freestyle seats receive 100% brand NEW one piece foam formed within a mold. This process allows exacting consistency from one seat to the next, while also providing an extremely dense and resilient foam.
The final foam product is in a whole other class of quality. It is far superior to typical custom seat methods, that involve leaving a layer of your old worn foam and topped with a few new layers then shaped by hand.
For add FRONT SEAT ONLY option, you are selecting to have your front seat wrapped with material that matches your new rear seat. This service is for the front seat COVER ONLY, and does NOT include any modification or repairs to the original foam. For this reason, it is important that the seat you send to be reupholstered be in very good condition, without damage to the foam.
WE WILL NOT REPAIR ANY FRONT SEAT FOAM WITHOUT ADDITIONAL CHARGES. It will almost always be cheaper for you to purchase a good OEM front seat to start with, rather than incur additional charges. Foam is expensive and the work to repair is time consuming. (In the future we will offer complete new front foam)